Application — Industrial special-equipment power
Requirement — This industrial special-equipment power application also required high-output discharge and 12V·24V regulated auxiliary power.
Solution — We integrated 12V·24V regulated DC-DC converters into a LiFePO4 4S pack (DC 12.8V, 300Ah).
Result — The integrated build in an approx. 32kg housing met the industrial special-equipment power specification.
If you are considering a custom build to a similar specification, submit a requirements sheet. Our engineer will review it and respond.
Specification
Specifications
| Product Code | DMOP-128LF300-B450-CV |
|---|
General
| Model | DMOP-128LF300-B450-CV |
|---|---|
| Dimension | Approx. L343 x W435 x h226mm (including protrusions) Approx. L330 x W405 x h226mm (excluding protrusions) |
| Weight | Approx. 32kg |
Battery ① Electrical specifications
| Battery Type | |
|---|---|
| Nominal Voltage | 12.8V |
| Nominal Capacity | 450.0Ah |
| Energy | |
| Max Discharge Power | |
| Charging Method | CC-CV(Constant Voltage with Limited Current) |
| Standard Charging Condition | 14.6V ±1%, 90A (0.2C)(End Current : 0.05C) |
| Max Charging Condition | 14.6V ±1%, 225A (0.5C)(End Current : 0.05C) |
| Standard Discharge Current | |
| Max Discharge Current | |
| Instantaneous Discharge Current | |
| Discharge Cut-off Voltage | 11.2V2.8V per cell |
| DC-DC Converter Output | DC 12.0V, MAX 20ADC 24.0V, MAX 20A |
Battery ② Operation · Safety
| Operation Temperature | Charging: +10 – +45°C Discharging: -20 – +60°C |
|---|---|
| Protection Circuit Module | Overcharge cutoff: 3.90V ± 0.01V per cell Overcharge recovery: 3.70V ± 0.05V per cell Over-discharge cutoff: 2.00V ± 0.01V per cell Over-discharge recovery: 2.40V ± 0.05V per cell Overcurrent cutoff: 470A ± 30% Short-circuit protection: Yes Over-temperature cutoff: Yes Cell balancing: Yes |
| Storage Life | Up to 6 months under no-load conditionsState of charge: SoC 60% Environment: ambient 25°C, humidity ≤70% |
| Cycle Life | ≥2500cycle (70% DOD @ ≥60% of initial capacity)* This cycle life applies only under the Standard Charging and Standard Discharge Current conditions |
Terminals · Control
| Terminal configuration | |
|---|---|
| Terminal specification | |
| Fastening · Wiring | |
| Charge/discharge switch (ON/OFF) |