Skip to product information
1 of 2

POWERCRAFT

Custom Battery Pack 25.2V 13.6Ah · 50A BMS · 24V DC-DC module

Custom Battery Pack 25.2V 13.6Ah · 50A BMS · 24V DC-DC module

Custom-build quote item

Product codeDMOP-252LI136-B50-CV

Pricing is quoted individually based on your requirements (voltage, capacity, peak current, enclosure, communication and so on). The button below pre-fills the RFQ form with this product's baseline specification, so you only need to edit what differs before submitting.

Start an RFQ with these specs →
contact@devicemall.co.kr · 02-982-7070 (Mon-Fri 09:00-18:00)
View full details

Application — PC and controller power

Requirement — The customer needed a power source for PC and controller power with 24V regulated auxiliary power.

Solution — We combined a 24V regulated DC-DC converter into a Li-ion 7S pack (DC 25.2V, 13.6Ah) as a single unit.

Result — The integrated build in an approx. 3.0kg housing met the PC and controller power specification.

If you are considering a custom build to a similar specification, submit a requirements sheet. Our engineer will review it and respond.

Specification

Specifications

Product CodeDMOP-252LI136-B50-CV
General
ModelDMOP-252LI136-B50-CV
DimensionApprox. L267 x W165 x h75mm (including protrusions)
WeightApprox. 3.0kg
Battery ① Electrical specifications
Battery Type
Nominal Voltage25.2V
Nominal Capacity13.6Ah
Energy
Max Discharge Power
Charging MethodCC-CV(Constant Voltage with Limited Current)
Standard Charging Condition29.4V ±1%, 2.7A (0.2C)(End Current : 0.05C)
Max Charging Condition29.4V ±1%, 7A (0.5C)(End Current : 0.05C)
Standard Discharge Current
Max Discharge Current
Instantaneous Discharge Current
Discharge Cut-off Voltage21.0V3.0V per cell
DC-DC Converter OutputDC 24.0V, MAX 10A
Battery ② Operation · Safety
Operation TemperatureCharging: +10 – +45°C
Discharging: -20 – +60°C
Protection Circuit ModuleOvercharge cutoff: 4.20V ± 0.025V per cell
Overcharge recovery: 4.00V ± 0.050V per cell
Over-discharge cutoff: 2.90V ± 0.025V per cell
Over-discharge recovery: 3.30V ± 0.050V per cell
Overcurrent cutoff: 75A ± 20%
Short-circuit protection: Yes (load cutoff with auto-recovery)
Over-temperature cutoff: Yes
Active cell balancing: Yes
Storage LifeUp to 6 months under no-load conditionsState of charge: SoC 60%
Environment: ambient 25°C, humidity ≤70%
Cycle Life≥700cycle (70% DOD @ ≥60% of initial capacity)* This cycle life applies only under the Standard Charging NO5 and Standard Discharge Current NO7 conditions
Terminals · Control
Terminal configuration
Terminal specification
Fastening · Wiring
Charge/discharge switch (ON/OFF)