Application — Communication equipment power
Requirement — The customer needed a power source for communication equipment power with 28V·24V regulated auxiliary power and real-time status monitoring.
Solution — We combined 28V·24V regulated DC-DC converters and CAN communication monitoring into a Li-ion 7S pack (DC 25.2V, 36Ah) as a single unit.
Result — The integrated build in an approx. 6kg housing met the communication equipment power specification.
If you are considering a custom build to a similar specification, submit a requirements sheet. Our engineer will review it and respond.
Specification
Specifications
| Product Code | DMOP-252LI36-B75-CV28 |
|---|
General
| Model | DMOP-252LI36-B75-CV28 |
|---|---|
| Dimension | Approx. L310 x W277 x H75mm (including protrusions) |
| Weight | Approx. 6kg |
Battery ① Electrical specifications
| Battery Type | 7S Li-Ion |
|---|---|
| Nominal Voltage | 25.2V (21.0–29.2V) |
| Nominal Capacity | 36Ah |
| Energy | 907.2Wh |
| Max Discharge Power | 840W |
| Charging Method | CC-CV(Constant Voltage with Limited Current) |
| Standard Charging Condition (0.2C) | 29.2V±1%, 7.2A, CC-CVEnd Current : 0.72A (0.02C) |
| Max Charging Condition | 29.2V±1%, 18A, CC-CVEnd Current : 0.72A (0.02C) |
| Standard Discharge Current | |
| Max Discharge Current | |
| Instantaneous Discharge Current | |
| Discharge Cut-off Voltage | 21.0V3.0V per cell |
| Regulated output | DC 28V – MAX 30A |
| Communication module (CAN 2.0a) | Option (CAN 2.0a): voltage, current, temperature and state of charge monitoring |
Battery ② Operation · Safety
| Max Temperature Range | Charging: 0 – +45°C Discharging: -20 – +55°C Storage (recommended): +5 – +30°C |
|---|---|
| Battery Management System | Module configuration: 1P Overcharge cutoff: 4.20–4.25V±25mV per cell Overcharge recovery: 4.00–4.20V±50mV per cell Over-discharge cutoff: 2.50–2.90V±80mV per cell Over-discharge recovery: 2.70–3.30V±100mV per cell Overcurrent cutoff: 135A–160A±25% per module Short-circuit protection: Yes Over-temperature cutoff: Yes Cell balancing: Yes Control method: MOSFET |
| Storage Life | Up to 6 months under no-load conditionsState of charge: SoC 60% Environment: ambient 25°C, humidity ≤70% |
| Cycle Life | ≥60% of nominal capacity after 500 cycles Charge/discharge condition: standard charge, then discharge at the standard discharge current down to the cut-off voltage |
Terminals · Control
| Terminal configuration | Positive(+) : 2P(++) Negative(-) : 2P(--) |
|---|---|
| Terminal specification | Rating: 600V, 100A (per pin) Operating temperature range: -40°C – +85°C |
| Terminal fastening and wiring | Bolt: SCREW M6X16 nut Thread: M6*P1.0(B5.0) |
| Charge/discharge switch (ON/OFF) | Option: charge/discharge rocker switch (ON/OFF) |