Skip to product information
1 of 2

POWERCRAFT

Custom Battery Pack 25.2V 5,443Wh · AC220V 4kW inverter · onboard charging

Custom Battery Pack 25.2V 5,443Wh · AC220V 4kW inverter · onboard charging

Custom-build quote item

Product codeDMOP-LI5443-AC4000-C25

Pricing is quoted individually based on your requirements (voltage, capacity, peak current, enclosure, communication and so on). The button below pre-fills the RFQ form with this product's baseline specification, so you only need to edit what differs before submitting.

Start an RFQ with these specs →
contact@devicemall.co.kr · 02-982-7070 (Mon-Fri 09:00-18:00)
View full details

Application — Special-purpose vehicle power

Requirement — The customer needed a power source for special-purpose vehicle power with AC220V mains power and recharging while driving.

Solution — We combined an AC220V 4kW inverter and an onboard charging module into a Li-ion 7S pack (DC 25.2V, 5,443Wh) as a single unit.

Result — The integrated build in an approx. 55kg housing met the special-purpose vehicle power specification.

If you are considering a custom build to a similar specification, submit a requirements sheet. Our engineer will review it and respond.

Specification

Specifications

Product CodeDMOP-LI5443-AC4000-C25
General
ModelDMOP-LI5443-AC4000-C25
DimensionApprox. L566 x W250 x H392mm (including protrusions)
WeightApprox. 55kg
Battery ① Electrical specifications
Battery Type7S Li-ion
Nominal Voltage25.2V (21.0–29.4V)
Nominal Capacity
Energy5,443Wh
Max Discharge Power
Charging MethodCC-CV(Constant Voltage with Limited Current)
Standard Charging Condition (0.2C)29.2V±1%, 40A, CC-CVEnd Current : 4.3A (0.02C)
Max Charging Condition29.2V±1%, 50A, CC-CVEnd Current : 4.3A (0.02C)
Standard Discharge Current
Max Discharge Current
Instantaneous Discharge Current
Discharge Cut-off Voltage21.0V3.0V per cell
AC outputAC 220V – 4,000W(60Hz) (Surge 5,000W ≤ 1.5Sec)
Charge ModuleIN - 12.5–22.0Vdc OUT - 29.2Vdc, Max 25A (CC-CV mode)
Battery ② Operation · Safety
Max Temperature RangeCharging: 0 – +45°C
Discharging: -20 – +55°C
Storage (recommended): +5 – +30°C
Battery Management SystemModule configuration: 6P
Overcharge cutoff: 4.20–4.25V±25mV per cell
Overcharge recovery: 4.00–4.20V±50mV per cell
Over-discharge cutoff: 2.50–2.90V±80mV per cell
Over-discharge recovery: 2.70–3.30V±100mV per cell
Overcurrent cutoff: 100A–125A±25% per module
Short-circuit protection: Yes
Over-temperature cutoff: Yes
Cell balancing: Yes
Control method: MOSFET
Storage LifeUp to 6 months under no-load conditionsState of charge: SoC 60%
Environment: ambient 25°C, humidity ≤70%
Cycle Life≥60% of nominal capacity after 500 cycles
Charge/discharge condition: standard charge, then discharge at the standard discharge current down to the cut-off voltage
Environment: ambient 25°C, humidity ≤70%
Terminals · Control
Terminal configuration
Terminal specification
Fastening · Wiring
Charge/discharge switch (ON/OFF)charge/discharge rocker switch (ON/OFF)